Features of ESA S530 system

1.1 high definition 7-inch TFT color display with built-in PLC

1.2 real time automatic check filling type programming mode, automatic calculation of bending and compensation force

1.3 2D graphics edit upper and lower dies, 2D graphics preview the workpiece (if the workpiece edits by graphics)

1.4 2D graphic programming (optional)

1.5 automatic calculation of bending process (optional)

1.6 manual bending items (single step bending without program interruption)

1.7 all programs, molds and parameters can save in the memory of CNC bending machine or U disk, and these data can be uploaded to other CNC or PC through U disk

1.8 provide complete PC offline programming software

1.9 user defined alarm information function

Special functions of ESA S530 system

2.1 provide the programming function of CNC bending machine control axis and other auxiliary functions

2.2 it can drive hydraulic shaft with proportional valve or servo valve, AC / DC servo driver, AC motor with or without frequency converter, and drive the most common field bus (esalin)

2.3 interface connection of front pallet, thickness detection, angle measuring instrument and manipulator

2.4 safety PLC communication function (Pilz, Lazer safe)

2.5 remote assistance function

2.6 high performance double machine linkage function, double machine does not need to add additional signal connection

2.7 U disk space can be used for workpiece and mold storage

2.8 hardware configuration (motor type and quantity, valve type and quantity, I / O type and quantity) can be modified on CNC