(1 customer review)

63T/2500 NC hydraulic press brake machine with manual crowning system

E21 NC type press brake machine , its operation is simple and price is cheap

Also it can make the box and other 90 degree product.


Share on facebook
Share on twitter
Share on whatsapp
Share on google
Share on pinterest
Share on email


This 63T/2500 NC press brake machine has high labor productivity and high working accuracy for bending metal sheets.

It adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.

The 63T/2500 bending machine can bend sheet once by one stroke of the slider. , After many times of bending, the workpiece with more complicated shape can be obtained.

When equipped with corresponding equipment, it can also be used for punching.

Working slide structure

1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily, and has the action specifications of inching, semi-automatic, automatic, etc., and the inching specification can be used for easy mold trial and adjustment.

2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.

3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.

4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)

5. With the function of slow descent control, the operator can better control the workpiece.

Hydraulic system

1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block rapid decline, slow decline, working speed bending, rapid return and upward and downward motions such as sudden stop of the slide block.

2. The oil pump adopts (USA SUNNY) gear pump, which can withstand high pressure and low noise.

3. The oil pipeline uses a combination of German ferrule joints and galvanized cold drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.

4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work and long life.

5. The machine tool can work continuously under rated load, the hydraulic system has no leakage and is continuously stable, with high precision.

Main features

The whole welded machine structure achieves high rigidity; the machine is designed by ANSYS software which can ensure the reliability and precision of the press brake.

The motors for Back-gauge and ram stroke are controlled by inverter, which can achieve high positioning accuracy of the Back-gauge and ram by changing the frequency and voltage of motor.

X axis (Back-gauge) and Y axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.

Side and rear metal safety guard meets European safety standard.

Hydraulic overload can be protected by overflow valve, System pressure can regulate by pressure switch easily.

Foot switch with emergency button can stop the machine immediately when accident happens.

63T/2500 bending Machine safety standard

EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off device (inclusive)
South Korean KACON foot switch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive)

E21 NC controller

Back-gauge and block control
Control AC motor or inverter
Intelligent and unilateral positioning
Work-piece counting function
Holding/decompression time setting
40 programs stored, 25 steps per program
One key back-up/restore of parameters
Unit for mm/inch
Language for Chinese/English


1System controllerDelemNetherlands
2Main motorSIEMENSGermany
3Electric componentsSCHNEIDERFrance
5Hydraulic pumpSUNNYUSA
6Foot switchKACONSouth Korea
7Tubing connectorEMBGermany
8Front arms supportHARSLEChina
9Manual R axisHARSLEChina
10Seal ringsNOKJapan
11Clamp toolingHARSLEChina
12 Punch and dieStandard Punch and multi-V die


1 review for 63T/2500 NC hydraulic press brake machine with manual crowning system

  1. Safiya Shaik

    How much of this machine ? I want to buy a cheap one

Add a review

Your email address will not be published. Required fields are marked *

Contact Us